I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
This is not really a Knoppix specific tip, but useful none the less for people who use Konqueror.
Have you ever been in a shell, a few directories deeper than your home directory and want to be able to open Konqueror in that same directory without having to open it and navigate there manually? I sure have. There is a way to do this.
From the shell type this:
Then Konqueror will open to the directory that you are currently located in. Since I do a lot of navigating from the shell, but sometimes want to open and use some of the Konqueror file tools, I find this really useful. Hopefully others will too.Code:kfmclient exec .
I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
That's nice. I had been right clicking on the screen and choosing the "Open Terminal Here" option, but I like your way better.Originally Posted by monkymind
Hi All
Thanks. This has solved a problem for
an expect script I am writing.
My solution was not giving the correct KDE
look. The links were underlined.
MyCode
Where is there documentation for kfmclient?Code:konqueror --config /etc/kderc /home/knoppix
Can I influence the window geometry or where it
pops up?
My most important question is how do you come up
with a discovery like this? What is your secret --
or are you not telling? If I have a key word
how do I search all the manuals -- or do you
just read them alphabetically.
K --> Help --> UNIX manual pages
has a lot to browse through but it
would be nice to have a search function.
Thanks!
Best Wishes
paradocs (edit 1)
I figured there must be a way to do this so I googled for it. I came up with this page. It contains everything I know about the matter. Hopefully it's helpful.Originally Posted by paradocs
It won't help in all situations, but 'apropos <keyword>' searches the manual page names and descriptions.Originally Posted by paradocs
HTH
- - Edwin
Thanks Edwin
Now I just have to remember the ending "s" in apropos
paradocs
--If you want to emulate Win behavior, edit ~/.bashrc and put in an alias:
alias start="kfmclient exec ."
Then ' source ~/.bashrc ' to grab the change.
Originally Posted by aay
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
Dell PowerEdge R330 Xeon E3-1220 v5 3.0GHz 32gb H330 2x 3.5" Trays SVR 2012
$189.99
HP ProLiant DL360 Gen9 Server 2x E5-2620v4 2.1GHz =16 Cores 32GB P440AR 4xRJ45
$220.00
Dell Poweredge R620 2x E5-2680 2.7ghz 16-Cores / 128gb / H710 / 2x Trays / 750w
$199.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$240.00
Dell PowerEdge R630 Dual Intel Xeon E5-2620 v3 @2.40GHz 32GB RAM No HDD H730
$132.50
HP ProLiant DL380 Gen9 Server 1x Xeon E5-2620V3 2.40 GHz 32 GB RAM No OS No HDD
$129.95
HP ProLiant DL360 G9 Server 2x Xeon E5-2690 V3 24 Cores P440ar 128GB DDR4 1x SSD
$279.99
$198.00
DELL PowerEdge R930 4x E7-8890v4 2.2GHz =96 Cores 128GB H730p PCIe 2xSFP+ RJ45
$1050.00