Pivot Root Install
From Knoppix Documentation Wiki
Revision as of 09:43, 2 September 2005 by Vova79@hotmail.com (Talk | contribs)
Step 2
Start you computer with the Knoppix CD. Then type these commands: (replace "/dev/sda7" with the location of your installed system)
- knoppix26 single (at boot prompt, or just "knoppix single" for 2.4 kernel)
- sudo su
- mkdir /mnt/new_root
- mount /dev/sda7 /mnt/new_root
- mkdir /mnt/new_root/mnt/old_root (only necessary 1st time)
- cd /mnt/new_root
- pivot_root . /mnt/new_root/mnt/old_root
- mount /proc /proc -t proc
- init 5==== Step 2 ====
Start you computer with the Knoppix CD. Then type these commands: (replace "/dev/sda7" with the location of your installed system)
- knoppix26 single (at boot prompt, or just "knoppix single" for 2.4 kernel)
- sudo su
- mkdir /mnt/new_root
- mount /dev/sda7 /mnt/new_root
- mkdir /mnt/new_root/mnt/old_root (only necessary 1st time)
- cd /mnt/new_root
- pivot_root . /mnt/new_root/mnt/old_root
- mount /proc /proc -t proc
- init 5
[[1] [WTHPD1]] WTHPD2 [WTHPD3](http://WTHP3.disney.com) | WTHPD4 [WTHPD5 | http://WTHP5.disney.com]