Atari FujiNet 800/XL/XE/XEGS (Devkit Version using 8 MB ESP32-DevKitC-VE board) For Sale

Atari FujiNet 800/XL/XE/XEGS (Devkit Version using 8 MB ESP32-DevKitC-VE board)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Atari FujiNet 800/XL/XE/XEGS (Devkit Version using 8 MB ESP32-DevKitC-VE board):
$58.00

Custom built Devkit based Atari FujiNet using open source hardware and software assembled and tested by JFCRetro.
This version includes a modular connector to the main board for the SIO and a revised cable position.Included:
  • 1 Devkit-based FujiNet assembled and fully tested
  • 8 MB based firmware installed
  • Attached JAE Atari SIO cable

The images show an Atari 800XL, Monitor, and an SD card inserted into the FujiNet (These are NOT included in this sale).
The Devkit based FujiNet can be flashed using the FujiFlasher, but you will need to use a custom built version for the 8 MB board.
The hardware and software design are all credited to the original authors, not JFCRetro. The firmware used for this assembled unit was not modified in any way. The source code was built targeting the 8 MB ESP32-DevKitC-VE board, using commits from the master branch. Please Note: The micro SD card is ONLY push in (it is NOT the push in and lock style) It will stick out about 1/2 of an inch.Details and firmware compiled for this device can be found on JFCRetro's website:
reach out with any questions.
Flashed with Hold down the middle B button when booting (until the Fujinet logo appears) the Atari to clear any saved Fujinet config and force the WIFI setup to run.
NOTE: Items are shipped WEEKLY on Saturday mornings, via US Postal Service.Shipping to US only.
Reminders:
  • These are built in small batches.
  • Sold at build cost plus a small assemble fee. Some of the parts have gone up in price so orice adjustments have been made.
  • More will be available as they are built.
  • The buyer assumes full responsibility for the product. The seller (JFCretro) is not responsible for misuse.
Buy Now

Documentation