-
fake hardware raid5
Hello,
I am trying to mount an existing windows partition with knoppix. The purpose is to make a dump of the windows installation.
There is an Intel 82801 SATA RAID Controller (rev 05) in the system. There are 4 HDs. 3 are arranged as an RAID5 and one is spare. I use knoppix 6.7.1 CD (german).
dmraid -b shows all 4 HDs.
When I try "dmraid -ay" I get 3 errors:
Code:
ERROR: spare set "isw_diffiigjfb_/dev/sdd" cannot be activated
ERROR: no mapping possible for RAID set isw_diffiigjfb_/dev/sdd
ERROR: device-mapper target type "raid45" is not in the kernel
RAID set "isw_gcdfjaffh_Volume0" was not activated
The first two belong to the spare device as sdd is the spare device (compared serial numbers in BIOS config and dmraid -b). The third one produces a lot of google-hits and seems to be a well known version/naming issue between dmraid a kernel. But I did not get any Information on how to fix/ work around it.
There is a kernel module called raid456.ko and it is loaded according to lsmod.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$44.62
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$18.99
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$99.95
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$109.00
WD 4TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0040BBK-WESN
$87.49
Seagate IronWolf Pro 18TB 7.2K 6G 3.5 SATA HARD DRIVE - ST18000NE000
$219.99