-
How do I backup/restore XP using Knoppix?
Hi:
Having just spent a week restoring Windows XP on my laptop, I have come to Knoppix.net to learn how to be able to do it better next time (without any help from Microsoft who will have stopped supporting XP by then). I have lots of old software that I fear may not run under W7 so I want to keep this old laptop going for ever.
Can I describe what I think I need to do and maybe someone out there can tell me if I have it right, or if it won't work and there's a better way.
My plan is to buy a USB drive big enough to take the entire C: drive (hda2), make an NTFS partition on it (sda1) which is big enough to take it (I can do that in Windows I think), then reboot into Knoppix, mount the two drives and do the command:
dd if=/dev/hda2 of=/mnt/sda1
If I have understand correctly, that will give me a byte-for-byte clone of the C: drive on the USB drive. Back in Windows I should be able to read/restore individual files from this. If (when?) Windows crashes, I should be able to boot into the Knoppix CD and mount sda1 and then ....
At this point I am not sure what to do about mounting hda2. The plan is to execute the "dd" command again but with if=/dev/sda1 and of=/mnt/hda2 but I can't figure out if hda2 needs to be formatted first, and if so, how. The dd command is doing a byte-for-byte copy so it shouldn't need to know how to write in the NTFS environment, but I can't figure out whether I need to format the partition first, and if so, whether it even matters what type of filing system I choose for the formatting.
The thing that worries me is that I have been told that operating systems other than Windows may have difficulty writing to NTFS partitions (because NTFS is poorly documented?). If I have got it right, using "dd" for the backup AND for the restore gets round this. If I need to restore XP and the hard disk is corrupt, I am not sure I know how to proceed if Knoppix must format the Windows partition as an NTFS filesystem and this is not easy.
Maybe some of you reading this can tell me if I am worrying too much. Is all this written-down somewhere?
Thanks
Peter
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP ProLiant ML350 Gen 9 Server 64GB RAM 2.4GHz Xeon 12-Core E5-2667 v3
$300.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$279.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$172.95
CEOhack 1U X9DRW-3TF+ 4 Bay Server 64GB DDR3 1x E5-2667 V2 3.30GHz 8C 1x 1TB HDD
$119.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
DELL POWEREDGE R300 SMT Inter Xeon 3.16 GHz Server w/4 GB/ISILOGIC Controller
$99.99
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00