Sry for the caps,
I use Knoppix regularly and I try to download the latest version ASAP. I use a Linksys WUSB11 v2.6 device to connect to the internet. I have found this device works with MandrakeLinux 9.1 and Knoppix only, however, the latest version (11-03-2003). Does not work any more, it simply stops when it tries to autoconfigure, I found that I can unplug the card before boot, plug it back in after boot, and run the Netowrk Configure and it works, but this is a little inconvenient. So I was wondering if there's any way to fix this.
Note: I do know that multiple reboots a re required (usually) to get this working, I rebooted 5 times before finally unplugging the thing and then plugging it back in after startup. I am writing this from within knoppix now, but It shouldn't even need to be unplugged.
Also: I ran into this same problem when I tried a "real" hard drive install using the 3.3 09-05 release.
SAMSUNG 870 EVO 1TB EVO 2.5" SATA INTERNAL SSD | MZ-77E1T0
$59.99
Samsung Galaxy Tab A7 Lite SM-T220 32GB, Wi-Fi, 8.7" Silver *NOT WORKING SEE ⬇️
$30.00
Samsung SE-506CB/RSBD Slim Portable USB Blu-ray Reader/Writer
$35.00
LOT OF 10 Mixed 256GB M.2 NVMe SSD
$120.00
Case For Samsung Galaxy Tab A9/ A9+ 5G/ A9 Plus Kids Shockproof Cover with Stand
$16.99
Samsung 870 EVO EQV 2.5" SATA III Internal SSD - Choose from 1TB 2TB Capacities
$54.00
Samsung USB 3.2 Gen 1 Type-C 256GB Flash Drive MUF-256DA/AM
$19.95
SAMSUNG Solid State Drive 990 PRO Series - 1TB, Sealed
$99.99
Samsung 1.6TB SSD SAS 2.5" 12G PM1635 MZILS1T6HCHP NetApp 520 Block
$69.95
OEM Samsung Galaxy Tab S9 Ultra 14.6" Book Cover Keyboard, Black, EF-DX915UBEGUJ
$199.99