Sry for the caps,
I use Knoppix regularly and I try to download the latest version ASAP. I use a Linksys WUSB11 v2.6 device to connect to the internet. I have found this device works with MandrakeLinux 9.1 and Knoppix only, however, the latest version (11-03-2003). Does not work any more, it simply stops when it tries to autoconfigure, I found that I can unplug the card before boot, plug it back in after boot, and run the Netowrk Configure and it works, but this is a little inconvenient. So I was wondering if there's any way to fix this.
Note: I do know that multiple reboots a re required (usually) to get this working, I rebooted 5 times before finally unplugging the thing and then plugging it back in after startup. I am writing this from within knoppix now, but It shouldn't even need to be unplugged.
Also: I ran into this same problem when I tried a "real" hard drive install using the 3.3 09-05 release.
Lenovo ThinkPad E15, i5, 8GB RAM, 256GB SSD, No OS, 20RD005HUS
$180.00
Lenovo Tab P11 Pro Gen 2, 11.2" 420 nits, 6GB, 128GB, Android 12
$208.99
Lenovo ThinkPad Yoga 11E 4TH Gen Core i5-7200 2.50GHz 8GB RAM 256 GB SATA SSD
$79.99
Lenovo ThinkPad E14 Gen 2 14-inch i5-1135G7 8GB 256Gb SSD Win 10 Pro No AC Grd C
$139.99
Lenovo - LOQ 15.6" Gaming Laptop FHD - AMD Ryzen 7 7435HS with 16GB Memory - ...
$799.99
Lenovo Legion Pro 5i 16" Gaming Laptop RTX 4070 8GB i9-13900HX 16GB RAM 1TB SSD
$1369.99
Lenovo 100e Laptop PC Computer 11.6" Windows 10 Celeron 4GB RAM 64GB SSD
$74.99
Lenovo Ideapad 1i 15.6" FHD Touch Laptop - Intel Core i3-1215U with 8GB Memor...
$499.99
Lenovo Slim 7 Carbon Intel -i7 1260P 16GB 1TB SSD 13.3 (2560x1600) Touch Laptop
$678.99
Lenovo 15.6" Laptop PC Computer AMD Pro 8GB RAM 256GB SSD Windows 10 WiFi
$146.29