I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
This is not really a Knoppix specific tip, but useful none the less for people who use Konqueror.
Have you ever been in a shell, a few directories deeper than your home directory and want to be able to open Konqueror in that same directory without having to open it and navigate there manually? I sure have. There is a way to do this.
From the shell type this:
Then Konqueror will open to the directory that you are currently located in. Since I do a lot of navigating from the shell, but sometimes want to open and use some of the Konqueror file tools, I find this really useful. Hopefully others will too.Code:kfmclient exec .
I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
That's nice. I had been right clicking on the screen and choosing the "Open Terminal Here" option, but I like your way better.Originally Posted by monkymind
Hi All
Thanks. This has solved a problem for
an expect script I am writing.
My solution was not giving the correct KDE
look. The links were underlined.
MyCode
Where is there documentation for kfmclient?Code:konqueror --config /etc/kderc /home/knoppix
Can I influence the window geometry or where it
pops up?
My most important question is how do you come up
with a discovery like this? What is your secret --
or are you not telling? If I have a key word
how do I search all the manuals -- or do you
just read them alphabetically.
K --> Help --> UNIX manual pages
has a lot to browse through but it
would be nice to have a search function.
Thanks!
Best Wishes
paradocs (edit 1)
I figured there must be a way to do this so I googled for it. I came up with this page. It contains everything I know about the matter. Hopefully it's helpful.Originally Posted by paradocs
It won't help in all situations, but 'apropos <keyword>' searches the manual page names and descriptions.Originally Posted by paradocs
HTH
- - Edwin
Thanks Edwin
Now I just have to remember the ending "s" in apropos
paradocs
--If you want to emulate Win behavior, edit ~/.bashrc and put in an alias:
alias start="kfmclient exec ."
Then ' source ~/.bashrc ' to grab the change.
Originally Posted by aay
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$191.99
ORICO 5 Bay Raid Hard Drive Enclosure USB C, 3.5ā€¯ SATA HDD, Up To 80TB, NS500RC3
$139.99
G-TECHNOLOGY 4TB G-RAID EXTERNAL HARD DRIVE ARRAY WITH THUNDERBOLT LOW USAGE
$113.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$13.99
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Orico 5Bay USB3.0 External Hard Drive Enclosure + RAID for 2.5/3.5 SATA HDD 80TB
$219.99
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$140.99