I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
This is not really a Knoppix specific tip, but useful none the less for people who use Konqueror.
Have you ever been in a shell, a few directories deeper than your home directory and want to be able to open Konqueror in that same directory without having to open it and navigate there manually? I sure have. There is a way to do this.
From the shell type this:
Then Konqueror will open to the directory that you are currently located in. Since I do a lot of navigating from the shell, but sometimes want to open and use some of the Konqueror file tools, I find this really useful. Hopefully others will too.Code:kfmclient exec .
I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
That's nice. I had been right clicking on the screen and choosing the "Open Terminal Here" option, but I like your way better.Originally Posted by monkymind
Hi All
Thanks. This has solved a problem for
an expect script I am writing.
My solution was not giving the correct KDE
look. The links were underlined.
MyCode
Where is there documentation for kfmclient?Code:konqueror --config /etc/kderc /home/knoppix
Can I influence the window geometry or where it
pops up?
My most important question is how do you come up
with a discovery like this? What is your secret --
or are you not telling? If I have a key word
how do I search all the manuals -- or do you
just read them alphabetically.
K --> Help --> UNIX manual pages
has a lot to browse through but it
would be nice to have a search function.
Thanks!
Best Wishes
paradocs (edit 1)
I figured there must be a way to do this so I googled for it. I came up with this page. It contains everything I know about the matter. Hopefully it's helpful.Originally Posted by paradocs
It won't help in all situations, but 'apropos <keyword>' searches the manual page names and descriptions.Originally Posted by paradocs
HTH
- - Edwin
Thanks Edwin
Now I just have to remember the ending "s" in apropos
paradocs
--If you want to emulate Win behavior, edit ~/.bashrc and put in an alias:
alias start="kfmclient exec ."
Then ' source ~/.bashrc ' to grab the change.
Originally Posted by aay
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.37
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$69.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$109.00
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$44.55
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$23.95