-
fake hardware raid5
Hello,
I am trying to mount an existing windows partition with knoppix. The purpose is to make a dump of the windows installation.
There is an Intel 82801 SATA RAID Controller (rev 05) in the system. There are 4 HDs. 3 are arranged as an RAID5 and one is spare. I use knoppix 6.7.1 CD (german).
dmraid -b shows all 4 HDs.
When I try "dmraid -ay" I get 3 errors:
Code:
ERROR: spare set "isw_diffiigjfb_/dev/sdd" cannot be activated
ERROR: no mapping possible for RAID set isw_diffiigjfb_/dev/sdd
ERROR: device-mapper target type "raid45" is not in the kernel
RAID set "isw_gcdfjaffh_Volume0" was not activated
The first two belong to the spare device as sdd is the spare device (compared serial numbers in BIOS config and dmraid -b). The third one produces a lot of google-hits and seems to be a well known version/naming issue between dmraid a kernel. But I did not get any Information on how to fix/ work around it.
There is a kernel module called raid456.ko and it is loaded according to lsmod.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
Western Digital My Book Velociraptor Duo Thunderbolt Enclosure (NEW) - No drives
$60.00
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$13.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
LaCie 8big Rack Thunderbolt 2 | 8-bay 1U Rackmount Hardware RAID |
$320.00