Knoppix 3.4 boots on my Athlon 64 3200. It doesn't recognize my USB ports though.
Hi i'm trying to run Knoppix 3.4 on my Athlon64 3000+ with a Seagate SATA HD. I just want to use it to install gentoo on my computer BUT i have serious troubles doing it cuz:
1. when i try to boot with knoppix the system crashes (guess it's cuz of the SATA and/or the 64bit Processor)
2. when i boot with knoppix26 it bootes up as it should BUT it doesn't recognize my SATA-HD plus my WLAN-Adapter (prism3-Chip) and i need both for the installation of gentoo
I remarked that the prism2_usb driver can be used when booting the knoppix kernel (tried it on another pc...) but as i can't boot it it's no use anyway.
Does anybody know a solution or workaround for that?
Knoppix 3.4 boots on my Athlon 64 3200. It doesn't recognize my USB ports though.
Works fine for me too, with my Althon64 3000. My hard disk is SATA, and isn't detected unless I use the 2.6 kernel, but it doesn't crash if I use 2.4... It just doesn't show up.
I found that after doing an hdd install, I couldn't boot Knoppix unless I took my Belkin USB bluetooth adapter out. Maybe if you unplug anything you don't need you might find it starts working? :/ It's not a very educated answer but it might work :P
ASUS H170M-PLUS Motherboard M-ATX Intel H170 LGA1151 DDR4 SATA3 HDMI DVI-D VGA
$47.99
Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk
$33.47
ASRock B550M Pro SE AM4 DDR4 SATA 6Gb/s 1 PCIe 4.0 x16 Micro ATX Motherboard
$84.99
MSI H81M-P33 Desktop Motherboard Intel MicroATX Socket LGA1150 USB 3.0 W/IO
$26.99
MSI PRO B650-P WiFi AMD AM5 DDR5 WiFi 6E ProSeries Motherboard
$112.95
Asus B85M-E/CSM B85 LGA 1150 Micro ATX DDR3 SATA3.0 Desktop Motherboard
$31.99
GIGABYTE GA-X99-UD4P MOTHERBOARD, M.2 SATA3, LGA2011-3, DDR4, & I/O Shield
$69.99
Micro ATX Desktop Motherboard ASUS H110M-C LGA 1151
$31.95
MSI PRO B650-P WiFi AMD AM5 DDR5 WiFi 6E ProSeries Motherboard
$99.95
MSI PRO B650-P WiFi AMD AM5 DDR5 WiFi 6E ProSeries Motherboard
$104.95