-
Junior Member
registered user
Video Resolution to small how to make it bigger?
after i ran knoppix-installer im only allowed to selected 640x480 in debian now and a savage video card is detected during boot.
What do i need to do so that i can get higher resolutions?
-
Senior Member
registered user
Surely there is some tool in that massive Kcontrol thing for adjusting the resolution. Otherwise you can do it like a real Linux geek and edit /etc/X11/XF86Config-4. If your resolution was fine when booted to cd you can also copy the XF86Config-4 from cd to your hdd install.
-
Senior Member
registered user
If you know the specifications of your hardware (video card model and memory and monitor refresh rates), you can run the command "xf86config" to get things set up properly. First, back up your current configuration:
Code:
mv /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.old
Then start "xf86config" There is a step by step guide here: http://www.bitbenderforums.com/vb22/...?postid=313121 I know the guide says Slackware, but it works the same in Debian/Knoppix. I would suggest trying the generic vesa video driver first when you come to that option. Just make sure that you have the correct refresh rates and resolutions set up. If xfree86 thinks the monitor can't support higher resolutions, it will not let you switch to those, and obviously it won't let you switch to higher resolutions if there are none there. Good Luck!
-
Senior Member
registered user
You also can use root shell command:
kxconfig
-
Junior Member
registered user
Thank you so much the kxconfig worked. Ive been messing with everything else all day and it wouldnt work... Thanks agian
-
krandtray (under menu as
system
|
Screen Resize and Rotate
its a kicker applet that allows you to adjust video settings on the fly
if you want it to auto start
go to
home
|
(your user name)
|
.kde
|
Autostart
in this folder place a link to application (right click option ) under command use krandrtray
next time you log in to kde it will auto start
Similar Threads
-
By Chromatic Distortion in forum Tips and Tricks
Replies: 0
Last Post: 06-30-2005, 02:05 AM
-
By lightbulb in forum General Support
Replies: 3
Last Post: 11-20-2004, 12:16 AM
-
By meansbeans in forum Hardware & Booting
Replies: 4
Last Post: 06-14-2004, 07:21 PM
-
By joekm in forum General Support
Replies: 1
Last Post: 06-04-2003, 01:55 PM
-
By DavidTempler in forum General Support
Replies: 1
Last Post: 05-22-2003, 04:52 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$95.00
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
LOT OF 4 CISCO SFP-10G-SR V03 10GBASE-SR SFP+ TRANS MODULE 10-2415-03 H2-3(8)
$32.94
ProLabs 10GBase-TX SFP+ RJ-45 Copper Transceiver Module P/N: SFP-10GBASE-T-C NEW
$34.99
Original CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module
$6.80
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$10.99
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$25.99
CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty
$39.99
Cisco Nexus 96-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP
$149.99
CVR-QSFP-SFP10G Cisco 40G QSFP+ to 10G SFP+ Adapter Modules 74-9474-02 V01 V02
$74.99