-
Segmentation fault with knoppix26 boot on knoppix 3.4
Hello Knoppix User,
I got the above problem, when booting knoppix 3.4 javascript:emoticon('')
javascript:emoticon('')
I know the workaround with the "noscsi" bootoption, but i need SCSI-Support on some of my boxes !!
The boot fails on several systems (tried 8 systems)
Anyone got a good idea ?
NOB
-
Junior Member
registered user
I guess, but somebody more knowledgeable than I should advise, that there would be a way to specify the scsi block; e.g. /dev/sda, /dev/sdb, etc. instead of /dev/hda.
So, instead of "noscsi" you would feed the kernel with the necessary info about the block device which is your scsi drive. I'm guessing here, but if you check how the bootup console is identifying your drives, you could try feeding it the scsi drive info, in place of the "noscsi" code.
It may just be an issue of trial and error until you get the command line correct.
Good luck!
-
OTOH, noscsi may be the only answer for awhile. megaraid seems to be still under construction as of 2.6.5-rc1, according to kerneltrap.org
-
Have you tried the expert26 paramater, then seen what scsi wrapper you needed, it is a slow method, but you can just load the one you need, without the problems from the other (hopefully, but not necessiarily, I still get issues with my Nforce2 chips and SCSI, and if I do get 2.6.5 off of 3.4, then I don't get sound)
Similar Threads
-
By tr in forum Customising & Remastering
Replies: 1
Last Post: 07-23-2005, 09:29 AM
-
By bluestick in forum Customising & Remastering
Replies: 0
Last Post: 03-29-2005, 02:33 PM
-
By bluestick in forum General Support
Replies: 0
Last Post: 03-29-2005, 11:09 AM
-
By alexl in forum Customising & Remastering
Replies: 0
Last Post: 09-17-2004, 02:36 PM
-
By funkyrat in forum General Support
Replies: 9
Last Post: 05-12-2004, 07:44 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
DELL PowerEdge R730 Server 2x E5-2690v4 2.6GHz =28 Cores 128GB H730 4xRJ45
$441.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$208.99
Dell PowerEdge R420 Dual Intel Xeon E5-2440 v2 @1.90GHz 32GB RAM No HDD H710
$74.50
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell Poweredge R210 II Server Xeon E3-1220 v2 3.1ghz Quad Core / NoRam / 1x Tray
$69.99
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$172.95
DELL PowerEdge R730 16SFF Server 2x E5-2690v4 =28 Cores No RAM/ HDD H730 4xRJ45
$232.97
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$294.99
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 128GB H730 4xRJ45
$418.00