Please tell us, which script did you use.
Greetings Werner
Hello people,
I just did a harddrive knoppix install and used the scripts to create an remastered iso.
Now I want to modify the menu witch is shown after knoppix is started.
(the menu where you can choose WWW, Email etc etc.)
I looked in the inittab and init2.d directories, but I still could not find how en where the menu is started.
I hope someone can point me in the right direction.
Wierd Jan
Please tell us, which script did you use.
Greetings Werner
Hello,
I used the kn-remaster from http://www.wp-schulz.de/knoppix/kn-script.html.
Wierd Jan
If you mean the LXDE-menu, you can find here some hints.
The main menu of ADRIANE is created in /usr/bin/adriane. The shell script /usr/bin/adriane is called from /etc/inittab.adriane which is copied to inittab if the boot parameter 'adriane' is used.
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.19
SEAGATE ST500LM021 500GB 7200RPM 2.5" SATA 6Gb/s 32MB Laptop Thin Hard Drive
$7.99
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$69.99
Seagate Exos X18 ST16000NM000J 16TB 7200RPM SATA 6Gb/s 256MB 3.5" Hard Drive
$134.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.26
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99