-
boot form mmcblk0 device
hello
I have remstered image of knoppix 644 and everything work fine, but recently I found problem with one Al in One Acer computer.
When booting from usb stick - all is ok, but i would like to boot from SD card. Acer has build in SD/MMC reader, but whem i put SD card with KOPPIX image and start booting boot process stops in place where it is looking for knoppix in block devices.
I 've unpacked minirt.gz and tryed to modyfy init script for searching in mmcblk devices for Knoppix image.
644 does not load driver for mmcblk devices so i copied mmc_core.ko mmc_block.ko sdhci.ko sdhci-pci.ko to modules dir and mdified init to load that modules and also make coresponding nodes in dev dir.
Now i can mout mmcblk0p1 on mnt-system
I packed minirt made iso and made bootabe SD
Now when booting i get message - "knoppix found on mmcblk0p1" and "Do not remove medium until stop."
But then i get /sbin/init help mesage insted of loading system.
Could anybody help with this?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$69.99
NEW Open Box Dell PowerConnect M8024-SFP+ Quad Port 10GbE SFP Module 0N805D (BH)
$29.99
HP Aruba JL083A HP 3-port 10GbE SFP+ 3910M/2910M Expansion Module
$150.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
(Lot of 10) Cisco SFP-10G-SR SFP+ Transceiver Module 10-2415-03
$40.00
New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in GBIC Transceiver module A
$15.80
New Cisco w/ Green Hologram SFP-10G-LR-S 10G SFP+ LR 1310nm 10km SMF LC Module
$34.99