-
boot form mmcblk0 device
hello
I have remstered image of knoppix 644 and everything work fine, but recently I found problem with one Al in One Acer computer.
When booting from usb stick - all is ok, but i would like to boot from SD card. Acer has build in SD/MMC reader, but whem i put SD card with KOPPIX image and start booting boot process stops in place where it is looking for knoppix in block devices.
I 've unpacked minirt.gz and tryed to modyfy init script for searching in mmcblk devices for Knoppix image.
644 does not load driver for mmcblk devices so i copied mmc_core.ko mmc_block.ko sdhci.ko sdhci-pci.ko to modules dir and mdified init to load that modules and also make coresponding nodes in dev dir.
Now i can mout mmcblk0p1 on mnt-system
I packed minirt made iso and made bootabe SD
Now when booting i get message - "knoppix found on mmcblk0p1" and "Do not remove medium until stop."
But then i get /sbin/init help mesage insted of loading system.
Could anybody help with this?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$191.99
ORICO 5 Bay Raid Hard Drive Enclosure USB C, 3.5” SATA HDD, Up To 80TB, NS500RC3
$139.99
G-TECHNOLOGY 4TB G-RAID EXTERNAL HARD DRIVE ARRAY WITH THUNDERBOLT LOW USAGE
$113.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$13.99
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Orico 5Bay USB3.0 External Hard Drive Enclosure + RAID for 2.5/3.5 SATA HDD 80TB
$219.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99