I wanted to start an ubuntu virtual machine as follows in Knoppix 7.2.0DVD (booted with 'fromhd'):
root# qemu-system-x86_64 -cdrom ubuntu-12.04.3-dvd-amd64.iso
The iso image was read OK, with the ubuntu boot screen appearing in the vga display of the emulator. However the booting failed with the following message:
[ 29.044201] BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:1]
[ 53.044186] BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1]
[ 89.044214] BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:1]
When the iso image is burned to a DVD, the ubuntu system boots up without a problem from the disk. And "qemu-system-x86_64" starts a Knoppix VM from iso without problems. So it appears that the ubuntu iso and the qemu behaves as expected individually.
Although this problem may reside well outside the domain of Knoppix per se, I hope I may receive advice on where to go from here. Thanks in advance for any help.
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$214.99
Dell Poweredge R520 2x Xeon E5-2470 v2 2.4GHz 20-Core 192gb 8xTray H710 2x750w
$344.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
HPE Proliant DL360 Gen9 1x Xeon E5-2620 V4 2.10GHZ 32GB DDR4-2133MHZ 2x 500W PSU
$100.95
24 Cores 2.6Ghz 32GB DDR4 Dell PowerEdge R730 Server H730 Raid Card 2x 1GB RJ45
$274.00
Dell Poweredge R210 II Server Xeon E3-1220 v2 3.1ghz Quad Core / NoRam / 1x Tray
$69.99
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
HP ProLiant DL360p G8 Server 2x E5-2690 2.9GHz 16-Cores / 192GB / P420 / 2x 750w
$189.99