You should fiddle around in knoppix-autoconfigure to replace the original network manager with wicd like I did, it's described somewhere in a post.
I have the feeling its under 60 seconds but maybe thats just me.
You should fiddle around in knoppix-autoconfigure to replace the original network manager with wicd like I did, it's described somewhere in a post.
I have the feeling its under 60 seconds but maybe thats just me.
Greetings, luther.
I'm using Knoppix 7.2 and just the following in rc.local now:
sudo iwconfig wlan0 txpower 5mW rate 54M key (key code) essid "(essid name)"
Time to browser on-line is 50 seconds, same as when using Win7 on this laptop.
FWIW.
1. sudo is not really necessary as Forester has pointed out.
2. Klaus K has changed the 7.2 boot up process somewhat to improve boot time,
but I'm not aware just where and how.
3. The reduced transmit power was a suggestion of Klaus K's to counter-act
local wifi interference. I don't know if this helps on time to connect
but it seems to improve the frequent disconnect situation here.
4. It's quite likely Network Manager has improved as well since this thread
was initiated.
In answer to you question, I suggest the following:
As root call up leafpad and edit /etc/rc.local
by adding the following line just before the "exit 0" line:
iwconfig (wifi's device name) rate 54M key (router key code) essid "(router essid name)"
If that doesn't improve things, then this might be one more reason
to benefit from upgrading to 7.2.
utu,
The line needed to be rooted for the LED to fire, but wasn't able to connect. Therefore, resorted to 'udhcpc' that was installed from synaptic:
'udhcpc' freezes knoppix 7.0.3 on my older hardware, giving credence to this post to your 'old' thread.Code:knoppix@Microknoppix:~$ sudo iwconfig wlan0 essid mynetwork knoppix@Microknoppix:~$ sudo iwconfig wlan0 key 6789abcdef knoppix@Microknoppix:~$ sudo udhcpc -b -i wlan0 -x hostname:Microknoppix -p /var/run/udhcpc.wlan0.pid udhcpc (v1.20.1) started Sending discover... Sending discover... Sending select for 192.168.0.14... Lease of 192.168.0.14 obtained, lease time 86400 /etc/udhcpc/default.script: Resetting default routes SIOCDELRT: No such process /etc/udhcpc/default.script: Adding DNS 8.8.4.4 /etc/udhcpc/default.script: Adding DNS 8.8.8.8 knoppix@Microknoppix:~$
'udhcpc' has a '-syslog' switch, but is useless when it causes knoppix to freeze!
luther
PS. 7.0.3 has been an excellent PC repair tool and hate to part w/it!
* posted w/udhcpc & w/nonetworkmanager cheatcode
I didn't make it clear that in Knoppix 7.2, I've gone back to using Network Manager.
I now use only the line I quoted earlier to boot my system.
You are quite right that the line itself must be issued by root.
This is, or may be, done by /etc/rc.local which has root:root ownership.
The programs you like in 7.03 may be available in 7.2 as well.
I'll take a look at my Synaptic to see if that's so, if you'll name it (or them).
Last edited by utu; 01-29-2014 at 10:40 PM.
I note that my version of Synaptic, without being
itself upgraded from the initial 7.2 values,
indicates software-center 5.1.2debian3.1 Utility
is available for download.
I have no experience with using software-center
and no current motivation to use it. Perhaps you
can tell me what it's good-for.
I use reiserfs persistence, but have no current need
for 4 G's of it.
Greetings again, luther.
You've obviously got the right idea about (not) trying to upgrade Knoppix this way.
Blacklisting software-center might be in order on this principle, but
perhaps a little heavy-handed for some of the more experienced Knoppixers,
who know how to handle the 'dependencey hell' aspect which may arise.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Crucial DDR3L 16GB Kit 1x8GB 1600 MHz PC3L-12800 1.35V Laptop RAM Sodimm Memory
$13.50
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$23.95
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Samsung 16GB (4x4GB) 1Rx8 PC3-12800U 1600Mhz DDR3 RAM Memory M378B5273DH0-CK0
$14.00
Lot Of 10 Mixed Samsung 16GB 2Rx4 PC4-2133P RDIMM DDR4-17000 ECC Server Memory
$149.99
Lot of 50 DDR3 8GB PC3-12800U Desktop 1600MHz Memory RAM Mixed Major Brands
$319.99