The easiest solution is to append the command in /etc/rc.local - it will load it, but it's not the right one
Hello,
I'm booting "knoppix desktop=kde" on a Dell Dimension 2350, and the ethernet module doesn't load at boot time. I can connect afterwards by loading the module manually
# modprobe b44
# dhclient eth0
Is there a way to make this b44 module load automatically at boot time? (A boot parameter, I'm hoping?)
Thanks,
Paul
# lspci -v
==cut==
01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
Subsystem: Dell Device 0127
Flags: bus master, fast devsel, latency 32, IRQ 17
Memory at ed000000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at 18000000 [disabled] [size=16K]
Capabilities: [40] Power Managemetn version 2
Kernel modules: b44
The easiest solution is to append the command in /etc/rc.local - it will load it, but it's not the right one
There is a file /etc/modules. Maybe you can add a line with the name of your module so that it is loaded at boot time.
I can see now that b44 driver is blacklisted by default. You can edit /etc/modprobe.d/broadcom-sta-common.conf and put # in front of b44.
This should do the trick, if not use the rc.local
And I just notice now the response from klaus2008. You can add b44 in /etc/modules, but still the first thing I would try is to unblacklist it
Last edited by mecho; 06-27-2010 at 09:53 AM.
Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT
$490.00
Dell PowerEdge R620 Dual Intel Xeon E5-2697 v2 @2.70GHz 128GB RAM No HDD S110
$144.50
Dell R630 Server 2x E5-2620 V4 2.1GHz = 16 Cores 64GB DDR4 2x 1Gb 2x 10Gb RJ45
$278.00
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$345.00
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R720 Dual Intel Xeon E5-2620 @2.00GHz 64GB RAM No HDD H710
$114.50
DELL R440 8-Bay Server with 2x Bronze 3104 CPU, 2x PSU H330 Raid | No Ram, HD
$359.00
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$318.00