-
Senior Member
registered user
For the un-initiated, rem_10.sh does the following:
It establishes a 15 Gb sparse-file on sdc1, works with it a while
then erases its tracks. When it's about done, it dumps a new
KNOPPIX compressed image (about 794 Mb right now)
into the KNOPPIX670 directory on sdc1.
You can verify the sparse-file by calling up a second terminal
while the first is humming away doing its job.
Mine is a 2 cpu 2.1 GHz laptop with 4 Gb ram.
The computer is 64-bits, but I'm only using 32-bit kernel, etc.
It does the 794 Mb cd renovation in about 15 minutes;
kl522 has cut that down from the 25 minutes required before the using sparse-file approach.
Last edited by utu; 08-19-2011 at 07:13 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$44.62
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$35.99
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$18.99
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$99.95
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$109.00
WD 4TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0040BBK-WESN
$87.49
Seagate IronWolf Pro 18TB 7.2K 6G 3.5 SATA HARD DRIVE - ST18000NE000
$219.99