1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
The best way to answer my many questions is by asking "Is it possible to boot the Knoppix 3.8.1 LiveCD and perform a Linux install such that a reboot is not required?" This can be refined by adding "After a 'knoppix-installer' session of installing to /dev/hda1, can I transfer control to the computer (/dev/hda1) so that everything will run from the Hard Disk and not the CD?" The CD is the speed bottleneck of a LiveCD system.
After installing Knoppix 3.8.1 via the 'knoppix-installer' script, I needed to modify /etc/lilo.conf to add "acpi=off" to the boot string.
Not knowing how to edit hda1:/etc/lilo.conf, I simply rebooted. As is noted elsewhere on this forum, my PS2 mouse was not installed since "acpi=off" had not been added to the lilo.conf boot string. The Knoppix CD creates a virtual filesystem. Where is the partition (hda1) to which it installed the new system?
How can I edit the file hda1:/etc/lilo.conf and not a virtual copy? I need to edit the actual file on hda1 so that when I reboot, 'acpi=off' is read from the new file at hda1:/etc/lilo.conf.
Thanks, Bob
1. you edit lilo.conf as root, from terminal or graficaly, from Konqueror (my prefer way)
2. you must save what you did
3. now, you must perform command LILO from terminal, you will see masage if all is good.
After that, your new lilo will work.
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$44.72
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$209.99
western digital WD hard drive 4tb Brand New x 2 (pair of drives) Lot.
$79.00
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$119.95
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Constellation ES.3 2Tb 7.2K SATA 6G/s 3.5" HDD - ST2000NM0033
$16.95
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$18.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate Enterprise Capacity 8TB 7200 RPM Internal Hard Drive ST8000NM0045
$99.99
HDD 3.5" SATA Hard Drive with Windows 7/Win 10 Installed Legacy
$34.19