Hi, Werner.
This may be too late, but here goes:
Have you investigated the Desktop Preferences pop-up GUI to make your menu appear?
That is: Right-Click (on desktop)>Desktop Preferences>Advanced tab>Show Menus.
That might be worth a try.
Hi, Werner.
This may be too late, but here goes:
Have you investigated the Desktop Preferences pop-up GUI to make your menu appear?
That is: Right-Click (on desktop)>Desktop Preferences>Advanced tab>Show Menus.
That might be worth a try.
This doesn't show the menu at top and it is a well known bug.
Hello,
I have a problem with the bash recall line feature when used with Midnight commander in the background
and I was wondering if someone already found a solution or an explanation about what is going on:
The setup: start a teminal emulator shell, start Midnight Commander (mc), press ctrl-o to hide mc,
type a shell command like "ls", press ctrl-o again (to get the mc back), navigate into a folder and back
to exercise midnight commander (use arrows to go over a folder like ".adobe", press enter to go into it
and enter again to go back to the previous level), press ctrl-o to hide mc, use the up arrow to get
the previous command typed (should be "ls") but instead some garbage shows up like:
cd "`printf "%b" '\0057home\0057knoppix'`"
and if you keep pressing the "up" arrows key you will get some more garbage until you eventually
get the expected last command typed (ls). This problem already appeared in previous versions
of Knoppix and is very annoying (at least to me) as I use this feature a lot.
Please respond if you have a solution or can provide some clue about how to fix it.
Thanks,
Gilles
Hi, Gilles.
My guess is that mc has a small syntax error in the line you call garbage.
There are lots of possibilities, for one thing; and for another, the
syntax doesn't agree with what man printf would lead you to expect.
/usr/bin/mc is binary, so I guess you'd have to look at the source to see
if changing \0057 to \u0057 in two places there solves this problem.
If it does, there are probably more similar errors, maybe due to some
change in conventions.
Run in LXTerminal:
click the appears to top, there is no bug.lxpanelctl config
Greetings, ericguo
If your comment is in regard to Werner's post #3,
the issue is whether or not the MENU is operative for
the lxpanel located at the top of the screen.
I have confirmed Werber's initial observation that
it is NOT operative.
Can you clarify whether or not you disagree on this?
LOT OF 2 Seagate 3.5” Hard drive 6TB 7200RPM 256MB SATA 6.0 Gb/s ST6000NM0024
$110.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.38
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.12
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$109.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95