Step 1 is to list your hardware. From a linux terminal type
lcpci -v
and post the output
Hey I just switched to Knoppix and am really new to linux, I dont know how to find or install drivers but Knoppix does not detect my WLAN card, the only real info I have is that the card is a Broadcom 802.11b/g WLAN I dont know if there is more information that I can provide to make finding a driver easier but any help would be greatly appreciated. I hate windows but cannot really make the switch until I have my wireless up...
Thanks for all your help.
Fletch
Step 1 is to list your hardware. From a linux terminal type
lcpci -v
and post the output
I am sure this is a rediculously newbie question, trying to use that command and it says...
"bash: lcpci: command not found"
really dont know what to do at this point, it seems that the pci might refer to a mcpci card that would have wifi, but my wireless card is internal if that helps. Is there possibly another command where I can run through the hardware I have?
Thanks again for your help...
Sorry, mu mistake a typo:
the command should be:
lspci -v
this will list the pci bus on your computer.
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.48
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.20
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$69.99
Seagate Exos X18 ST16000NM000J 16TB 7200RPM SATA 6Gb/s 256MB 3.5" Hard Drive
$134.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$109.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.01
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99