I wanted to start an ubuntu virtual machine as follows in Knoppix 7.2.0DVD (booted with 'fromhd'):
root# qemu-system-x86_64 -cdrom ubuntu-12.04.3-dvd-amd64.iso
The iso image was read OK, with the ubuntu boot screen appearing in the vga display of the emulator. However the booting failed with the following message:
[ 29.044201] BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:1]
[ 53.044186] BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1]
[ 89.044214] BUG: soft lockup - CPU#0 stuck for 23s! [swapper/0:1]
When the iso image is burned to a DVD, the ubuntu system boots up without a problem from the disk. And "qemu-system-x86_64" starts a Knoppix VM from iso without problems. So it appears that the ubuntu iso and the qemu behaves as expected individually.
Although this problem may reside well outside the domain of Knoppix per se, I hope I may receive advice on where to go from here. Thanks in advance for any help.
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HPe D2220sb c-CLASS 10-SLOT SFF DIRECT ATTACHED STORAGE BLADE 7.2TB 10K SAS SFF
$139.99
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.54
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$290.00