-
Senior Member
registered user
a new & improved, self-contained Knoppix personal backup
.
I posted a simple backup program on this forum a while back at:
http://www.knoppix.net/forum/threads...ghlight=backup
I've refined it a bit. Mine now requires only about 77M, about half the space it formerly required.
Not only is this a nice backup, you can use the same procedure to re-establish all your
preferences on the next upgrade of Knoppix, as I just did.
Its use is as follows. More on this in the original reference, if needed.
When you make a new LiveUSB, don't use every last MB for persistence;
leave a little in /mnt-system, say 200MB or so. That is, just devote 200MB LESS to persistence.
After you have modified your new Knoppix LiveUSB somewhat, add 'backup' to your /home/knoppix directory; then, occasionally, as root, exercise 'backup' to put an update.tar.gz file into /mnt-system. Whenever you modify your new system, do another backup to keep current.
If you ever spoil* your knoppix-data.img, delete knoppix-data.img; move update.tar.gz
from the mnt-system into the same directory that knoppix-data.img was in and reboot;
re-establish the persistence file when prompted. Assuming Knoppix is again functioning,
either delete update.tar.gz now or move it back into the /mnt-system directory; don't
leave it in the same directory as knoppix-data.img. Make a new backup soon in any event.
Here's the little program:
Code:
#!/bin/bash
#
# 'backup'
#
# This script captures personal folders, adjustments, choices & tweaks,
# but does NOT account for program additions or removals
# relative to the LiveUSB's initial configuration;
# e.g., changes achieved using Synaptic.
#
# Note: do 'chown root:root backup' & 'chmod +x backup'.
cd /
echo -e 'Tarring data to update.tar in /tmp..\c'
tar -cf /tmp/update.tar KNOPPIX-DATA/home/
tar -rf /tmp/update.tar KNOPPIX-DATA/etc/
tar -rf /tmp/update.tar KNOPPIX-DATA/root/
tar -rf /tmp/update.tar mnt-system/boot/syslinux/syslinux.cfg
echo '..Done.'
#
echo 'Zipping update.tar to update.tar.gz in /tmp.'
echo -e 'Patience; this may take a little time..\c'
cd /tmp #tar -tf update.tar > tar.lst
gzip update.tar; echo '..Done.'
#
echo -e 'Moving update.tar.gz to /mnt-system..\c'
mv update.tar.gz /mnt-system; echo '..Done.'
#
echo 'All done.'
#
exit 0
____________________________
* I consider knoppix-data.img 'spoiled' either when my LiveUSB won't boot, or when the OS
doesn't seem to act as it should. I've spoiled my share.
In my experience this has usually been a result of one of three errors on my part:
1..Changing the plugged status of the USB while it is doing a read or write operation;
2..Bringing in too much additional program content via Synaptic; or
3..Making some OS change as ROOT that didn't turn out right.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
128GB Kit 4x 32GB PC4-17000 LRDIMM DELL POWEREDGE R730xd R730 R630 Memory RAM
$139.96
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
RAMAXEL 8GB 2Rx8 DDR3 PC3L-12800S LAPTOP SODIMM RAM MEMORY
$8.00
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$33.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$15.90
Samsung 16GB (4x4GB) 1Rx8 PC3-12800U 1600Mhz DDR3 RAM Memory M378B5273DH0-CK0
$14.00
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY DDR4 64GB (4x16GB) 3200MHz PC4-25600 Desktop RAM Memory DIMM 288PIN
$129.95
HYNIX HMT31GR7BFR4C-H9 8GB PC3-10600R DDR3-1333MHZ 2Rx4 (LOT OF 8) DRAT-3
$40.00