Using modconf I was able to load successfully usb_storage on my system but scsi_mod seems not included in the list of modules proposed.
Is there an other way to check if it is present or not among the available modules as browsing through each category one per one?
The module I loaded with modconf is no longer listed in lsmod after a reboot.
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
HP ProLiant ML350 Gen 9 Server 64GB RAM 2.4GHz Xeon 12-Core E5-2667 v3
$300.00
Dell Poweredge R620 2x E5-2680 2.7ghz 16-Cores / 128gb / H710 / 2x Trays / 750w
$199.99
Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT
$490.00
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$345.00
HP ProLiant DL380 Gen9 Server 1x Xeon E5-2620V3 2.40 GHz 32 GB RAM No OS No HDD
$129.95
Dell PowerEdge R230 1U Server BOOTS Xeon E3-1270 v5 @ 3.60GHz 8GB RAM NO HDDS
$79.99
Chenbro NR12000 1U 1x 8m QUAD CORE E3-1230v2 3.3GHz 8GB RAM NO HDD
$239.00
DELL PowerEdge R630 8SFF Server 2x E5-2699v3 2.3GHz =36 Cores 64GB H730 4xRJ45
$345.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$300.00