-
Error 17 at GRUB boot
I installed, with no errors, Adrianne Knoppix. Everything fine till reboot. Rebooted, and got
Stage 1.5
Booting
Error 17:
I went back and looked at the grub files and the names and addresses appeared to be right, but error 17, is file not found, but it doesn't list WHICH FILE, Anyone with similar install issues?
-
Originally Posted by
pebl
I installed, with no errors, Adrianne Knoppix.
Q 1. What form of install did you use? Do I understand that the hard disk was involved, possibly with some re-partitioning? Or did you perhaps use the flash-install utility, and/or flash drive?
Q 2. Are you (or someone in your household) visually impaired? Adrianne is a screen-reader version of Knoppix that is not right for everyone.
Everything fine till reboot. Rebooted, and got
Stage 1.5
Booting
Error 17:
I went back and looked at the grub files and the names and addresses appeared to be right, but error 17, is file not found, but it doesn't list WHICH FILE, Anyone with similar install issues?
Usually, it makes sense to "install Knoppix-Linux to hard drive" only if you plan to modify the system and re-master, e.g. make your own version of Knoppix (which is fine, the more the merrier.) I hope you haven't lost functionality! In the event that you intended to dual-boot Linux and (say) Windows, your problem might have been caused by a difficulty with the "mode" of the hard drive; see the Ubuntu problem/fix summary if so.
Cheers!
Krishna
p.s. There is an option to copy the CD/DVD files to the hard drive, e.g.
Code:
knoppix tohd=/dev/sda1
which would copy to the first partition on the first hard drive; after that first time, you could boot the CD and type
Code:
knoppix fromhd=/dev/sda1
This gives you the speed of a hard drive (minus a little overhead for decompressing the filesystem, etc.) while avoiding the difficulty of "permanent" partitioning, and allowing Knoppix to co-exist with some other OS's filesystem (but not NTFS, hopefully - that's considered risky.) This can be made into a normal-seeming multi-boot setup as described here.
-
1. The hard drive is involved. I'm trying to install it on my SCSI (0) which is at /dev/sdkx. Just to be safe, I used gparted to wipe the drive and created a swap and root system with a boot area on root. This was the FULL Knoppix 6.2.1 CD install.
2. I tried Adrianne and it's really annoying to listen to. I turned the volume off. I installed that, rebooted, the 4 penguins came up and it froze. No response from keyboard at all. Can't get any log files.
3. No, I'm strictly an "IX" guy. Don't want anything to do with Windows at all. This is not a dual boot either. Strictly one OS, one boot partition. Root and two swap area take up an entire drive. I am willing to put the time in to completely convert all my software installed previously to what Knoppix requires. I need the upgrade.
4. Trying to install Knoppix FULL onto single disk now and boot. It's not even got GRUB done right. In my scheme (setup), I answered what would be /dev/sdk0 as swap, sdk1 as root and boot. I just booted and it's trying to load boot from root (hd4.1) which should be (with my pseudo-SCSI) items, hd(10,1) or if it's just looking at the SCSI hd's, should be hd(0,1). Installation goes off with out a problem.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
** Intel i3 10100F CPU Processor - USED **
$47.99
AMD Ryzen 9 7900X3D Gaming Processor - 12 Core And 24 Threads - 5.60 GHz Max Boo
$349.99
Intel - Core i9-14900K 14th Gen 24-Core 32-Thread - 4.4GHz (6.0GHz Turbo) Soc...
$548.99
Intel Xeon E5-2680 v4 SR2N7 2.40GHz 35MB 14-Core LGA2011-3 CPU Processor
$14.99
Intel - Core i5-14600K 14th Gen 14-Core 20-Thread - 4.0GHz (5.3GHz Turbo) Soc...
$306.99
AMD Ryzen 9 7950X3D Gaming Processor - 16 Core And 32 Threads - 5.70 GHz Max Boo
$449.99
AMD Ryzen 7 7700 Processor (5.3 GHz, 8 Cores, Socket AM5) Boxed -...
$195.00
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$4.23
Intel Core i5-13400F 2.50GHz 10-Core Processor LGA 1700 BX8071513400F
$164.98
Intel Core i5-13600K - 13th Gen Raptor Lake 14-Core (6P+8E) 3.5GHz LGA CPU
$259.99