-
Senior Member
registered user
Originally Posted by
krishna.murphy
AFAIK there is no advantage to 6.2.1; it may even be a downgrade, according to some posters here (6.2's what I use.) Nevertheless, you could most likely do what I think you're trying to do, except it sounds like you did a "full hd install." That is really only useful if you're going to re-master (make your own DVD) - otherwise, it simply leads to problems like you're describing, because Knoppix really isn't well-suited to running that way. Better to install Debian, if you want to go the hd-install way, seems to be the watch-word.
What specifically do you want to get out of the "upgrade?" It may be that you're better off with what you had. You may also want to look at how to use the "poor man's install" (using tohd or the flash-install program) and then fiddle with the boot arrangements, perhaps as Capricorny describes
here.
Anyway, good luck, and let us know how it goes!
Cheers!
Krishna
p.s. Thanks for the kudos! I agree that the tone of this forum is outstanding - that's why I try to add what I can.
Counting bugs in 6.2 and 6.2.1, my personal result is that the 6.2 bugs are bigger and more serious, especially with some kernel stuff making installations and compilation difficult. Therefore, I tend to quite stubbornly advise people to use 6.2.1 or 6.3. The module conflicts between the two makes it hard to do any kind of mix and match. That's one of the great problems with attempts at ordinary installs with systems that are specifically not designed for it.
The knoppix-data.img thing is AFAIK only for running from sticks or "poor man's installs" - the only installs I think can be recommended. And you can do lots ot tweaking with your "installs" just by modifying that file, keeping different versions giving you "different installs" etc.
Similar Threads
-
By jrocky in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 03-18-2006, 01:42 PM
-
By siggy in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 09-27-2005, 11:09 PM
-
By loopback in forum General Support
Replies: 3
Last Post: 09-04-2004, 09:23 PM
-
By bongski55 in forum General Support
Replies: 23
Last Post: 08-27-2003, 01:12 PM
-
Replies: 9
Last Post: 08-02-2003, 03:20 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module
$579.97
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$499.00
Cisco FPR1010-NGFW-K9 FirePOWER Security Appliance **CISCO EXCESS**
$339.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$99.95
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$32.90
Cisco 2900 Series CISCO2901/K9 v06 Integrated Services Router
$39.99
CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty
$39.99
Cisco C1000-24T-4X-L 1000 Series Switches with 4x 10G SFP+ uplinks
$599.00
UNCLAIMED CISCO MERAKI MS120-24P-HW 24-PORT GIGABIT CLOUD MANAGED PoE SWITCH
$128.20