-
Working Solution
Greetings all, here is a working solution and yes, a complete Samba is not installed on the current Knoppix 6.2.1 DVD
To use Samba with Knoppix 6.2.1 perform the following tasks:
Download the Knoppix 6.2.1 DVD and burn it, then boot a machine from it
Use the flash-knoppix app to create a boot usb thumb drive - an 8 GB drive will more than suffice
It will take a while to copy knoppix to the thumb drive and it may seem like it is hanging on 99% completed for a long time - just be patient, it will complete
Boot into knoppix using the new thumb drive - knoppix will ask you if you want to create some space for saved files and if so how much - choose the rest of the available space, choose encrypted or unencrypted to suit your needs. Creating saved space will also take a while - be patient
Once that task is completed, download the latest tgz archived version of Samba from samba.org
As root, configure Samba to install under /UNIONFS/usr/local/samba and make make install
Once installed, edit the /UNIONFS/usr/local/samba/lib/smb.conf to suit your needs
Start Samba as a daemon
/UNIONFS/usr/local/samba/sbin/smbd -D -s /UNIONFS/usr/local/samba/lib/smb.conf
Start nmbd only if you need it - I don't so there is no need to start it up
Samba installed via this method will remain persistent on your knoppix thumb drive - you can likely configure it to start on boot - but I see no need to do this as Samba, or any unneeded service, should definitely not be started on Knoppix unless absolutely required.
Enjoy!
-
simpler solution and explanation
There is a much simpler solution and explanation.
knoppix has only samba client by default meaing you can access shares but since you're not a server, no one can access yours. To do this you'd need to install samba from debian repos but be careful about version conflicts with existing samba software.
So to access other shares simply do:
sudo mkdir /mnt/ANY-NAME
then, whenever you need to access (optionally make a script):
1. sudo mount -t smbfs -o uid=knoppix,workgroup=YOUR-WORKGROUP-NAME,username=YOUR-USERNAME,password=YOUR-PASSWORD //192.168.1.3/ANY-NAME /mnt/ANY-NAME
2. in pcmanfm navigate to /mnt/ANY-NAME (and optionally drag it to the left bookmark pane for future access)
3. see? easy.
and to unmount do (if you really want to):
sudo umount /mnt/ANY-NAME
Footnotes:
1. Caps are to be replaced by your data
2. If you have spaces in your data, enclose in quotes like this: "ANY-NAME"
3. //192.168.1.3/ANY-NAME can also be targeted with //COMPUTER-NAME/ANY-NAME
Last edited by krishna.murphy; 11-25-2010 at 06:05 PM.
Reason: Removed note to moderator after merging threads
-
Ah, cough-cough... The thread is "How to Start a Samba Server in Knoppix 6" NOT "How to Access a Samba Server in Knoppix 6"
Older versions of Knoppix came with a Samba server installed, not so for the new version, thus my valid, meaningful and helpful post on how to install and run a Samba server from Knoppix 6.
Not sure where a post about how to access a Samba server from Knoppix 6 should go - but certainly not here.
Similar Threads
-
By lovetide in forum Networking
Replies: 1
Last Post: 06-09-2006, 02:42 AM
-
By BALDRICK in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 03-28-2006, 11:20 AM
-
By v-lee in forum Customising & Remastering
Replies: 6
Last Post: 06-27-2005, 09:03 PM
-
By pau1knopp in forum General Support
Replies: 5
Last Post: 01-29-2005, 02:40 AM
-
By charliet in forum Networking
Replies: 0
Last Post: 04-05-2004, 06:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c G9(Gen9) 2x 10 CORE E5-2660v3 2.6GHz 128GB RAM No SSD
$222.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.43
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
Dell PowerEdge FC630 Server Blade Node 2*E5-2697 v4 2.30GHz CPU 256GB RAM NO HDD
$359.99
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$290.00
DELL PowerEdge M630 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$286.00