If you A: have a copy of the kernel (will work)
B: have a kernel config file and rebuild it. (might not work)
I've done a very bad thing and accidently removed the 2.4.20-31.9 kernel from my Redhat 9 PC. Can I use Knoppix to restore it somehow? I have Knoppix 3.3 CD and I've used it a few times, just to play around with it, but I am not sure of it's limitations.
thanks
If you A: have a copy of the kernel (will work)
B: have a kernel config file and rebuild it. (might not work)
Lets assume that /dev/hda3 is your RH9 root partition. Boot with Knoppix. Mount the root partition as read write right-clicking on the iconod the desktop and changing the device properties. Open a konsole window & get root access. Copy or download the RH9 kernel RPM file. Install the rpm: rpm -Uvh linux-2.4.20-31.9-i386.rpm. Edit the grub.conf file or the lilo.conf file. If necessary run lilo command. Reboot.
OK Im about to try this but before I do, What do I need to edit the grub.conf file with? How will I know what info to put in it?
If it is the exact same kernel version as the one that was lost then you probably do not need to edit it . If you do need to edit it, all you should have to do is to replace the current kernel line & have it point to the new kernel. The RH9 manual Chapter 2 should be a good point of reference: http://www.redhat.com/docs/manuals/l...ual/ref-guide/.
I hope this helps.
James
Ok, I only have hda1 and hda2
I changed bot permissions to RW. I set the password for root via the command line terminal. I "sudo su -" get the root prompt and run this command "mount /mnt/hda1 -o remount,rw" I also tried the same command with hda2.
I get this error:
mount: /mnt/hda1 not mounted already, or bad option
Why is it not mounting?
ok I was able to mount to my harddrive with
mount /dev/hda2 /mnt/hda2
I DL'ed a copy of the RPM and am now running
alien -i packagename.rpm
we'll see if this works
UPDATE
I got this message when I ran the above command
alien -i kernel-source-2.4.20-8.i386.rpm
dpkg: unable to access dpkg status area: Read-only file system
what should the properties of the .rpm file be?
right now it is rw-r-r
I am sorry if I left out a crucial step. You do not, should not use alien.
Upon mounting hda2, copy the kernel RPM file to /mnt/hda2/tmp. Next you have to chroot into hda2. A chroot is a change root. It makes the system think that /mnt/hda2 is your new / as opposed to its current root from the Knoppix CD. Using the following command:
chroot /mnt/hda2 /bin/bash
Then you can use rpm to install the kernel package.
rpm -ivh /tmp/kernel-version.rpm
If this works, edit grub.conf if necessary. Next exit the chroot with the exit command. Unmount /dev/hda2:
umount /mnt/hda2
Reboot.
Again, my apologies.
James
James,
No problem, the Alien thing was working anyways. Ok I tried what you posted and I was able to install the kernel RPM. Now about the grub.conf file.
I ran a find / -name grub.conf and it came back with:
/etc/grub.conf
I did a ls -al on /etc/grub.conf and got this:
lrwxrwxrwx 1 root root 22 Oct 15 2003 grub.conf -> ../boot/grub/grub.conf
I am not sure by looking at that link where grub.conf is located. I tried all the DIRs(while still in chroot mode)
I opened a new terminal console and did a cd to /mnt/hda1
I found grub.conf under /boot/grub
the contents are:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/hda2
# initrd /initrd-version.img
#boot=/dev/hda
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
password --md5 $1$adRtnzb5$hNqORBo.f757r8WftCiHM1
default=0
timeout=10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Red Hat Linux (2.4.20-
root (hd0,0)
kernel /boot/vmlinuz-2.4.22-xfs ro root=LABEL=/
initrd /boot/initrd-2.4.20-8.img
I changed the kernel line because when I checked /boot i found a file called vmlinuz-2.4.22-xfs
I was unable to find any initrd*.img files by running find / -name initrid*.*
Thanks for your help.
j
uggh.. I've been messing with this thing for the last few days and still can't seem to get it working
USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB 128GB LOT
$249.37
Lot SanDisk USB Flash Drive Cruzer Blade Glade Force Ultra Flair Luxe 3.0 3.1
$149.99
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$80.39
SanDisk Cruzer Glide USB 3.0 16GB 32GB 64GB 128GB 256GB Flash Drive Memory Lot
$276.48
New TESLA OEM Model S,3,X,Y USB Flash Drive for Dashcam & Sentry Mode 128GB
$18.99
SanDisk 256GB Ultra USB 3.0 Flash Drive
$16.00
Sandisk 16GB 32GB 64GB 128GB Cruzer Blade Flash Drive Memory Stick USB Lot Pack
$4.99
2TB USB 3.0 Flash Drive Memory Photo Stick for iPhone Android iPad Type C 3 IN1
$13.00
Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop 1TB 2TB lot
$73.29
Lot USB Flash Drive Memory Stick Pendrive Thumb Drive 2GB,4GB, 8G, 32G, 64G 128G
$217.13