Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
I installed Knoppix-3.4 to hatd-disk, install with lilo (default) boot works.
I want to try grub boot and have problems getting the kernel options right:
title knoppix-3.4
kernel (hd0,2)/boot/vmlinuz-2.6.5 ramdisk=100000 lang=us apm=power-off atapicd nomce\
ro root=/dev/hda3
module (hd0,2)/boot/initrd.img-2.6.5
which are same (as in lilo.conf) except for ro root=/dev/hda3
The boot messages..
...
RAMDISK: incomplete write (-28 != 3276 4194304
EXT2-fs:hda3: couldn't mount beacause of unsupported optional feaures(4)
Kernel panic:VFS: Unable to mount root fs on /dev/hda3
(hangs here)
Any ideas?
-ishwar
Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M520 Blade Server Xeon E5-2403 NO HDD NO RAM
$45.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.36
Dell Blade M630 Server - 2x E5-2680V4 2.4GHZ/35M 14C- No Memory - No drives
$99.00
Cisco B200 M5 Blade 2x6154 Xeon Processors 16x64GB Memory Dimms Tested/Warrant
$4325.00
HP ProLiant BL460c Gen9 Blade 2x E5-2650v4 2.2GHz =24 Cores 128GB P246 650FLB
$261.00
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00