I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
This is not really a Knoppix specific tip, but useful none the less for people who use Konqueror.
Have you ever been in a shell, a few directories deeper than your home directory and want to be able to open Konqueror in that same directory without having to open it and navigate there manually? I sure have. There is a way to do this.
From the shell type this:
Then Konqueror will open to the directory that you are currently located in. Since I do a lot of navigating from the shell, but sometimes want to open and use some of the Konqueror file tools, I find this really useful. Hopefully others will too.Code:kfmclient exec .
I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
That's nice. I had been right clicking on the screen and choosing the "Open Terminal Here" option, but I like your way better.Originally Posted by monkymind
Hi All
Thanks. This has solved a problem for
an expect script I am writing.
My solution was not giving the correct KDE
look. The links were underlined.
MyCode
Where is there documentation for kfmclient?Code:konqueror --config /etc/kderc /home/knoppix
Can I influence the window geometry or where it
pops up?
My most important question is how do you come up
with a discovery like this? What is your secret --
or are you not telling? If I have a key word
how do I search all the manuals -- or do you
just read them alphabetically.
K --> Help --> UNIX manual pages
has a lot to browse through but it
would be nice to have a search function.
Thanks!
Best Wishes
paradocs (edit 1)
I figured there must be a way to do this so I googled for it. I came up with this page. It contains everything I know about the matter. Hopefully it's helpful.Originally Posted by paradocs
It won't help in all situations, but 'apropos <keyword>' searches the manual page names and descriptions.Originally Posted by paradocs
HTH
- - Edwin
Thanks Edwin
Now I just have to remember the ending "s" in apropos
paradocs
--If you want to emulate Win behavior, edit ~/.bashrc and put in an alias:
alias start="kfmclient exec ."
Then ' source ~/.bashrc ' to grab the change.
Originally Posted by aay
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.05
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99