I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
This is not really a Knoppix specific tip, but useful none the less for people who use Konqueror.
Have you ever been in a shell, a few directories deeper than your home directory and want to be able to open Konqueror in that same directory without having to open it and navigate there manually? I sure have. There is a way to do this.
From the shell type this:
Then Konqueror will open to the directory that you are currently located in. Since I do a lot of navigating from the shell, but sometimes want to open and use some of the Konqueror file tools, I find this really useful. Hopefully others will too.Code:kfmclient exec .
I usually end up in the opposite situation. Browsing a directory with konq and wanting to change to a terminal window.
Accomplished by:-
Thanks for your tip!Code:ctrl+t
rob
That's nice. I had been right clicking on the screen and choosing the "Open Terminal Here" option, but I like your way better.Originally Posted by monkymind
Hi All
Thanks. This has solved a problem for
an expect script I am writing.
My solution was not giving the correct KDE
look. The links were underlined.
MyCode
Where is there documentation for kfmclient?Code:konqueror --config /etc/kderc /home/knoppix
Can I influence the window geometry or where it
pops up?
My most important question is how do you come up
with a discovery like this? What is your secret --
or are you not telling? If I have a key word
how do I search all the manuals -- or do you
just read them alphabetically.
K --> Help --> UNIX manual pages
has a lot to browse through but it
would be nice to have a search function.
Thanks!
Best Wishes
paradocs (edit 1)
I figured there must be a way to do this so I googled for it. I came up with this page. It contains everything I know about the matter. Hopefully it's helpful.Originally Posted by paradocs
It won't help in all situations, but 'apropos <keyword>' searches the manual page names and descriptions.Originally Posted by paradocs
HTH
- - Edwin
Thanks Edwin
Now I just have to remember the ending "s" in apropos
paradocs
--If you want to emulate Win behavior, edit ~/.bashrc and put in an alias:
alias start="kfmclient exec ."
Then ' source ~/.bashrc ' to grab the change.
Originally Posted by aay
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 64GB | 8x HDD Trays
$1614.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$299.99
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R230 Single Intel Xeon E3-1220 v5 @3.00GHz 16GB RAM No HDD H330
$102.50
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$214.99