-
Knoppix 9.1 making knoppix-data.img and tohd
I like to use the cheatcode tohd to put the knoppix dvd onto the hard drive. However, I didn't use mkimage when I ran it initially. (I don't know if that would make a difference)
For some reason, using the cheatcode "mkimage" later was ignored.
My boot command line was something like this:
knoppix64 tohd=/dev/sda1
and it dutifully created the KNOPPIX directory on /dev/sda1 but I didn't get a persistent storage file.
One thing that's interesting is that when knoppix boots it automagically scans the drives and finds that KNOPPIX directory even if I don't specify the cheatcode "fromhd=/dev/sda1".
So if you want to create that knoppix-data.img by hand just launch a terminal after booting into your KNOPPIX and
dd if=/dev/zero of=/mnt-system/KNOPPIX/knoppix-data.img bs=1024K count=4000
This will make a 4000MB persistent file (you can make larger if you like) The hard drive that I'm using is formatted FAT32 so my limit is 4GB. Using other formats will have no such restriction.
(And as always, exercise care with dd since you can easily clobber your drives if you enter the wrong parameters. They don't call it disk destroyer for nothing. I've done it once or twice by entering parameters without thinking.)
Then you need to format it
mkfs.ext2 /mnt-system/KNOPPIX/knoppix-data.img
(You may need to use a -F parameter to "force" it to use a regular file, since it normally expects block devices)
(For some reason I thought it had to be reiserfs, but ext2 seems to work. I kept formatting it as reiser and it wouldn't use it)
Also, if you don't like the messages about KNOPPIX-DATA when you boot, there's a file called "knoppix-data.inf" that you can rename. It will mount a persistent PARTITION, and since we're using a persistent FILE, we don't really need it. The error messages don't hurt anything, but if you rename that file, you won't see them anymore. You can always rename it back to the original name.
mv /mnt-system/KNOPPIX/knoppix-data.inf /mnt-system/KNOPPIX/was-knoppix-data.inf
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$37.48
Juniper Networks EX Series EX2300-24P - switch - 24 ports - managed - rack-mount
$549.38
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+
$74.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper EX4550-32F-AFO 32 Port 10G SFP+ Dual AC w/EX4550-VC1-128G, FULL 4PST-RMK
$595.00
Juniper QFX5200-32C-AFO 32P QSFP28 Switch
$1399.00
Juniper EX4300 48-Port Gigabit Network Switch With Ears P/N: EX4300-48P Tested
$149.99