-
Senior Member
registered user
Knoppix 7.2 breaks PXE boot
I have successfully PXE booted Knoppix 7.0.5 using pxelinux with the following relevant settings:
Code:
kernel knoppix/linux
append nfsdir=192.168.1.200:/knoppix nodhcp lang=en apm=power-off ramdisk_size=100000 init=/etc/init nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime BOOT_IMAGE=KNOPPIX
initrd knoppix/miniroot.gz
After upgrading the copy of Knoppix on my NFS server to 7.2 and upgrading the files "linux" and miniroot.gz (now called minirt.gz) to the new versions, PXE boot now errors out. My pxelinux config is the same except that I have upgraded the last line to reflect the new file minirt.gz.
I get the following error message:
Code:
/init: cd: line 1: can't cd to /modules/net
Loading network device module(s)
/init: cd: line 1: can't cd to /modules/net
sh: can't access tty; job control turned off
/ #
-
Senior Member
registered user
Resolved
Sorry for the post, I fixed my own issue. After looking into this more, miniroot.gz did not change to minirt.gz. I was trying to grab the files off of the CD .iso but I forgot that it is a real pain in the butt to get a hold of both "linux" and minirt.gz since you can't get them this way. Instead you have to boot up a copy of the knoppix distro, start knoppix terminal server so that the /tftpboot dir is created, and then copy off these files from this dir. What a pain.
-
Using the DVD, terminal services do not appear to work properly. Remote station will start the boot process but fail at Probing network device handles by .ko sh cant access tty job control turned off. For example, yellowfin.sh, I can reconfigure to include yellowfin and the error just returns to the next ko thats not selected. just keeps going up the list.
Anyone ran into that?
Thanks, Tim
-
Any luck on this itman007? I've noticed several of my lab machines are not booting my knoppix PXE because they fail to load the network drivers (error displays something about the last file in modules, yellofin or zaurus.ko). I've selected all drivers when setting up knoppix terminal (select-all love on that screen please) and on another test added more drivers into modules/firmware with no luck.
-
No luck yet. Im going to need to dedicate some time to figure this out unless Werner or someone steps up. What are your lab pcs? Mine are Dell Optiplex 740s mostly.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
DELL POWEREDGE M620 Blade (2x)Xeon E5-2630 2.3GHz 64GB RAM 250GB HDD NO OS
$59.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PowerEdge M630 Blade 2x E5-2690v4 2.6GHz =28 Cores 64GB H330 2x10Gb X520
$264.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.40
Apple Xserve G5 Server
$1400.00
Dell PowerEdge 1955 Blade Server 2x Intel Xeon 2.33GHz 4GB / 72gb hdd x 2 omy759
$39.99
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
Cisco B200 M3 2x E5-2697 V6 @ 2.70GHz Blade Server 2x HDD Blanks 256GB Ram
$360.00
HP ProLiant BL460c G9(Gen9) 2x 10 CORE E5-2660v3 2.6GHz 128GB RAM No SSD
$222.00