Hi all,
I was trying to run knoppix 9.1 off of a flash drive on a Microsoft Surface laptop 1st gen (1782).
Pressing the volume down after pressing the power button boots from the usb, I can get into the bios settings with using volume up after pressing the power button.
It gets as far as telling me what the cpus are, then it says "waiting for usb" and then just stops, and drops to a sh where I can't type anything on the surface laptop's keyboard.
DELL PowerEdge R730 Server 2x E5-2690v4 2.6GHz =28 Cores 128GB H730 4xRJ45
$441.00
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$125.99
Dell R630 Server 2x E5-2620 V4 2.1GHz = 16 Cores 64GB DDR4 2x 1Gb 2x 10Gb RJ45
$275.00
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT
$490.00
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$172.95
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$114.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 64GB H730 4xRJ45
$313.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
DELL PowerEdge R730XD Server 2x E5-2697v4 2.3GHz =36 Cores 64GB H730 4xRJ45
$407.00